The VAS 6154diagnostic tool can be used on all 2000+ VW Audi Skoda vehicles including NEW AND FUTURE MODELS in production via wireless network. Here we have collected the most frequently asked questions from customers and offered the corresponding answers.

VAS6154 Diagnostic Tool  Wireless Download Install License

Q1: The 16 & 19 files in the CD come with VAS6154 have been lost, where to download the software?

A1: Free download from these tested links:

ODIS 5.15: https://share.weiyun.com/5QR2p9C (password: stbtl4)

ODIS 5.16 (latest) : https://share.weiyun.com/5UICOap password: kl3nxz)

Q2: Which operation system should I install  VAS6154 software on? Can I install Audi, VW and Skoda software at the same computer?

A2: Win7 or Win 10 is ok. You can install the car brands software above at the same computer.

Q3: When I install software for my VAS6154, it prompts there is a virus in it, how to do?

A3: Please disable the anti-virus software.

Q4: How do i bypass windows defender in windows 10 to install ODIS software for VAS6154?

A4: It’s easy to do. Just close or uninstall anti-virus software.

Q5: Does ODIS software come with ODIS engineering software or only ODIS service?

A5: Both have.

Q6: I have original factory VAS 6154 account, can I program key online?

A6: Yes, you can.

Q7: It prompts the license of VAS 6154 has expired as shown in the picture below.

Vas 6154 Wireless Download Install License Faqs 2

A7: Please check the system date on your computer and adjust it forward.

For example, the expiration time is 1st January, 2020, and you can change the date to any month in 2019.

Q8: Does VAS 6154 support online coding function?

A8: Yes, it does.

Q9: Is it possible to use VAS 6154 for Seat?

A9: No, it isn’t. It’s better to use VAS 5054A.

Q10 Can VAS6154 program Passat TDI SEL 2014 key?

A10: Yes, it can.

To be continued…

 Audi Volkswagen ODIS 6.2 with license

How to set up VAS 6154 wifi

Step 1: Input the fourth CD and open it and then install the vas 6154 driver

Step 2: Open the CD and then chose the vas 6154 driver to install

Step 3: After installed and click on the Desktop – symbol

Step 4: Click on the Device Configuration

Step 5: Choose the connection way “WLAN”

Step 6: Choose the “save”

Step 7: Plug the vas 6154 to the car

Step 8: Open the WIFI and find the VAS-6154 wifi name and connect it.

Step 9: It shows Connected

Step 10: The state of connect successfully

Step 11: Open odis software. Now the latest version is 4.4.1

Step 12: VAS 6054 wifi connection setup successfully.

Done! Ready for use!

 Component Unlocking with ODIS on VWAudi

Volkswagen & Audi introduced component lock (anti-theft/immobilizer) function to their newer transmission control modules to help fighting unauthorized swap of the control unit. If a TCU/TCM is faulty and has been replaced, a component unlock is therefore required.

Note: You don’t need to unlock the unit if you choose to clone the SW from your original unit to the new one.

Typical error messages:

Contains Component protection (Component protection active)
The control unit is currently associated with a VIN other than the vehicle VIN or the control unit VIN

You need the following tools to perform component unlock:

VAG diagnosis tool (like VAS5054A, VAS 6154) to connect to your vehicle
ODIS software
A VW/Audi account depending on the vehicle

Procedure for unlocking TCU:

Run a diagnosis in your ODIS software
Locate and select the entry “Component protection”
Click on “Perform test…”
Click on “Done/Continue”
Enter the required information. (Activation number can be your own record number)
Enter your VW/Audi online account credentials
Click on “OK”
On success, ODIS should display “The component protection base programming has been carried out successfully.”
Click on “Done”
Follow the instructions provided by ODIS
End of your component base programming
Go back to the test screen and you should see a green check mark before component protection
Perform basic settings using guided functions
Erase your previous fault codes
You may now load your SW into the TCU if needed. If you don’t have the flash program, you may contact your Shing Hoi representative.